PVC boats – how to improve quality?
Today, boats made of polyvinyl chloride can be called one of the most popular. For this reason, they are in mass sale. Due to increased demand, many manufacturers began to produce them. Both large companies and small format companies participate in the production process. The latter are often unknown to consumers and may produce low-quality products.
KEY ADVANTAGES OF PVC BOATS
The boat, made of polyvinyl chloride, is characterized by increased resistance to physical stress and mechanical damage. The fabric used for its manufacture has increased elasticity. In addition, she has an increased resistance to aggressive environments. The boat does not require drying after each swim. She does not have to be constantly repaired; she is not afraid of water.
If the tissue is damaged, it will not tear. For repairs, you just need to close the damaged area with a special kit. After that you can continue your voyage. As for the motor, it can have quite a lot of power.
TYPES OF BOATS PVC
There are many models of PVC boats. But they are all divided into two main types:
rowing;
rowing-motor.
Rowing boats are used with oars. But even on most of these models, you can install a small motor. This will require a transom.
Rowing-motor boats are designed to float with a motor. This is their main purpose. Motor power may vary. It is between 2.5-60 hp
FEATURES OF PURCHASING PVC BOATS
If you want to be sure of the product you are buying, read reviews about a particular manufacturer. If the company refuses to provide any information about its products, it is better to refuse to purchase a boat from her. You should know under what conditions and where the boat was made.
You can buy a boat of both Russian and foreign production. But it is important that it be high-quality products that meet European standards. Today, boats of this type are classified as high-quality products. But they will be such if the seams are glued not only evenly, but also hermetically. This protects the boat from water penetration and swelling.
In the instructions attached to the boat, you will find all the necessary information about design calculations and hydrodynamics. The manufacturer of quality products also provides information on safety rules that must be followed when using the boat. If it is not, it means that you are trying to sell low-quality products.
IMPROVING QUALITATIVE CHARACTERISTICS
To improve the quality characteristics, you can use a special film. It is designed to book a surface made of polyvinyl chloride. It is made from thermoplastic polyurethane. Due to this, the strength characteristics of the boat will be strengthened, which will make it possible to protect it from puncture or abrasion. In addition, the thickness and shade of the thermoplastic polyurethane film can be any. It all depends on your needs and personal wishes.
As a result of using a polyurethane film for booking boats, you will significantly improve the quality characteristics of the boat. But the appearance also improves, because the film gives the surface an excellent gloss.
The bottom of the boat should be as rigid as possible. Small rowing models use thick and thick fabric. In some cases, an inflatable floor is used. If you have a large boat, you can use folding or collapsible flooring. It can be made using wooden slats. But a durable design with an aluminum profile. Additionally, the boat can be equipped with an awning or keel.
For motor boats made of polyvinyl chloride, keel is more important. It allows you to more confidently fit into the turns and gives good directional stability. In addition, it significantly reduces the effects of waves and wind. You can use a special pad to protect the keel, because if it is broken, the maximum speed can be significantly reduced. It will prevent the boat from entering glider mode.
Even boats with an inflatable deck are for sale. Such designs perfectly combine the advantages of low-cost models with convenient operation. If you plan to swim in ice water, then the deck will serve as additional thermal insulation.
If your boat is motorized, equip it with a solid and fairly rigid bottom. It is made of composite material. But you can choose a light alloy. It will give the vessel enhanced strength and speed properties. But this solution has a single negative point: such a boat cannot be stored in a case and placed in the trunk of a car.
In conclusion, it is worth noting that for whatever the boat is intended, it is important to ensure its safety. It does not matter if you go on vacation or fishing. Only a quality boat will cope with its function.